APRILIA Atlantic 300 Service Station Manual page 93

ATLANTIC 300 i.e.
•
Fasten the belts to the chassis rear
section.
•
Lift the hoist arm until the belts are taut.
•
Working on the right side, unscrew and
remove the nut «8».
•
From the opposite side, slide off the pin
«9» and collect the washer and the
spacer.
•
Remove the engine together with the
centre stand and the rear wheel.
INSTALLING THE ENGINE ON THE CHASSIS
•
Move the chassis with small alternating
movements until it is perfectly aligned
with the fixing holes.
•
From the left side, insert the pin «1»
and place the washer and the spacer.
CAUTION
WORK WITH CARE PAYING ATTENTION TO YOUR FIN-
GERS AND LIMBS.
Engine from vehicle
ENG VE - 93