4.3. Mounting flanges
Appropriate wall fixings must be used
4.4. Installation Location
When installing MelcoREMOTE:
-
Avoid locations in direct sunlight
-
Avoid locations exposed to steam or oil vapour
-
Avoid locations where combustible gas may leak, settle or be generated
-
Avoid installation near machines emitting high-frequency waves
-
Avoid places where acidic solutions are frequently handled
-
Avoid places where sulphur-based or other sprays are frequently used
-
Avoid areas of high humidity
-
Install inside the building
-
Install near the connected indoor units, if applicable
Page 12 of 52