Polar Electro S710 User Manual page 25

3. Start from the Time of day display by pressing the OK to start measuring
your heart rate. A heart symbol will start flashing and your heart rate in
beats per minute will appear in max. 15 seconds. The receiver returns
automatically to the Time of day display within 5 minutes if there is no
heart rate reception.
The following displays start to alternate, if you have no bike or altitude
settings in use, as you enter the Measure mode:
Exercise name Memory left
Time of day
Current
heart rate
Exercise set in use/ Recording rate
BasicUse (E0)
S710 man GBR/B kopio.pm6 46-47
Bike OFF Altitude OFF
No bike in use
C 46
The following displays start to alternate, if you have bike 1 or 2 and
altitude on, as you enter the Measure mode.
Exercise name Memory left
Time of day
Current
heart rate
Exercise set in use/
Recording rate
BasicUse (E0)
4. If you want to record cycling information, keep the bike still until your
heart rate appears on the display. Press OK to start recording your exercise.
Or
If you want to record cycling information without heart rate measurement:
after the heart rate reading 00 appears press OK and start cycling.
C 47
8/3/01, 14:33
Bike name Altitude
and bike functions
bike in use
S speed A autostart
C cadence P power
Underline indicates that
function is set on.