Reflex Mark Dimensions - Brady BradyPrinter i7100 User Manual

11 Media
11.3

Reflex Mark Dimensions

Labels with reflex marks
Figure 26 Reflex mark dimensions
Dimension
Code
A
AZ
L
M
XL
XM
Z
Table 8 Reflex mark dimensions
User Manual
virtual label front edge
reflex mark
Designation
Label distance
Distance between print zones
Width of reflex mark
Height of reflex mark
Distance mark - material edge
Distance mark - middle of paper track
Distance virtual label front edge - actual label front edge
 Adjust software settings
• Reflex marks must be on the back side of the material (liner).
• Label sensor for reflex marks on the top side on request.
• Specification is valid for black marks.
• Recognition of colored marks may fail.  Preliminary tests are needed.
Continuous Material with reflex marks
Dimension (mm)
> 2
> 2
> 5
3 - 10
5 - 60
-55 - ±0
0 up to A /
recomm. : 0
33