Automatic Lap Recording; Heart Rate View; Sport Zones; Bike Settings - Polar Electro CS600 User Manual

Polar CS600 User Manual
The RR data recording function measures and records heartbeat intervals with one millisecond
resolution. This enables the analysis of heart rate variability (HRV) using the Polar ProTrainer 5
software. The RR data function consumes the memory of the cycling computer and when setting the
function, the remaining recording time is shown on the lower row of the display.

Automatic Lap Recording

Set the automatic lap recording
Select
Settings > Features > A.Lap > On > set the lap distance
The cycling computer will automatically record laps. Choose

Heart Rate View

Choose a format to view your heart rate
Select
Settings > Features > HR view > HR / HR% / HRR%

Sport Zones

Define Polar Sport Zones in the cycling computer
Select
Settings > Features > Sport zones > Sport zone low limit
Set the lower limit of sport zone 1 by pressing UP or DOWN. Then press OK. Set the lower limits of
each sport zone in the same way. When setting the lower limit, the upper limit of the previous zone is
set automatically.
Press and hold LIGHT to switch between sport zone views:
(beats per minute) or
BPM
You can change settings easily by using the Polar ProTrainer 5 software. For further information,
consult software help.
You can lock/unlock sport zone by pressing and holding the

Bike Settings

Select
Settings > Bike
You can set three bike preferences for the cycling computer. Prepare the settings for the bikes and
when you start training, select bike 1, 2 or 3. Bike 1 is set as a default.
Select
Settings > Bike > Bike 1, Bike 2, Bike 3
to deactivate speed, cadence and power sensors, and to measure heart rate, altitude, and
Other
temperature data only.

Wheel Size

Select
Bike > Bike 1 > Wheel
Wheel size settings are a prerequisite for correct cycling information. For more information on
measuring the wheel size, see Measuring Wheel Size.

Autostart: On / Off

Select
Settings > Bike > Bike1 > Autostrt
The Autostart function starts or stops automatically the exercise recording when you start or stop
cycling. The Autostart function requires Polar Speed Sensor or Polar Speed Sensor W.I.N.D.

Arrival time

Select
Settings > Bike > Bike 1 > Arr. time
(percentage of heart rate reserve).
HRR%
or . Bike 2 and Bike 3 can be turned on or off. Select
Other
to deactivate.
Off
(percentage of maximum heart rate) or
HR%
button during your ride.
LAP
29