Before The Test; Performing The Test; After The Test - Polar Electro CS600 User Manual

Polar cs600 user manual
Hide thumbs Also See for CS600:
Table of Contents

Advertisement

Polar CS600 User Manual
• You should be relaxed and calm. Lie down and relax for 1-3 minutes before starting the test.

Before the Test

Wear the Transmitter
For further information, see Wear the Transmitter.
Enter User Information
Select
Settings > User
To carry out the Polar Fitness Test, enter your personal user information (if you entered the personal
user information before, there is no need to do this again) and long-term physical activity level in the
User settings.
Set HR
-p On
max
If you want to obtain your predicted maximum heart rate value, turn HR
Select
Test > Fitness > HR max -p > On

Performing the Test

Select
Test > Fitness > Start > Fitness Test Lie Down
The fitness test begins in five seconds. Arrows indicate that the test is ongoing. Stay relaxed and limit
body movements and communication with other people.
If you have not set your long-term physical activity level in User Settings,
is displayed. Select
,
Top
High
Settings.
If your cycling computer does not receive your heart rate at the beginning or during the test, the test
fails and
Test failed, check WearLink
the textile strap is snug enough, and start the test again.
When the test is over, you will hear two beeps.
evaluation. For further information on evaluations, see Fitness Level Classes.
To display your
Predicted maximum heart rate
is displayed.
Update to VO2 max?
• Select
to save the OwnIndex value to your user settings and
Yes
• Select
only if you know your laboratory-measured VO
No
fitness level class from the OwnIndex result. Your OwnIndex value is saved only to the
menu only. For further information, see Fitness Test Trend.
Trend
(if
Update to HR max?
HRmax-p
• Select
to save the value to your user settings.
Yes
• Select
if you know your laboratory-measured HR
No
Stop the test at any time by pressing STOP.
Saved the OwnIndex and HR

After the Test

Fitness Level Classes
Your OwnIndex is most meaningful when comparing your individual values and changes in them over
time. OwnIndex can also be interpreted based on gender and age. Locate your OwnIndex on the table
below, and find out how your aerobic fitness compares to others of the same gender and age.
Top athletes typically score OwnIndex values above 70 (men) and 60 (women). Olympic-level
endurance athletes can reach values as high as 95. OwnIndex is highest in sports that involve large
muscle groups, such as running and cross-country skiing.
Men
,
, or
. For further information on activity levels, see User
Moderate
Low
is displayed. Check that the transmitter electrodes are wet and that
OwnIndex
value press DOWN. Press OK to exit.
(if HRmax-p is on) is displayed.
Fitness Test canceled
-p values, they will be used for calculating calorie consumption.
max
-p on.
max
Set your personal activity level
is displayed with a numerical value and level
Fitness Test Trend
value, and if it differs more than one
2max
.
max
is displayed for a few seconds.
menu.
Fitness Test
38

Advertisement

Table of Contents
loading

Table of Contents