Settings; Riding Distance For Estimated Time Of Arrival Function And; Automatic Lap Recording Settings (Cycling Set) - Polar Electro CS200 User Manual

5. SETTINGS

You can view or change the settings in the Settings menu.
Tip: Settings can also be configured using the Polar UpLink Tool™. They can then be transferred to your
cycling computer from your PC. For further information, see page 55.
To set values:
• Adjust or select a value with the RIGHT button.
• Accept your selection and proceed in the menu with the MIDDLE button.
• Cancel your selection or return to the previous mode or menu by pressing the LEFT button.
Press MIDDLE
• Cycling SET
Press RIGHT

5.1 RIDING DISTANCE FOR ESTIMATED TIME OF ARRIVAL FUNCTION AND

• Timer SET
Press RIGHT
• Limits SET
In the cycling settings you can make two different settings:
Press RIGHT
• Bike SET
Press RIGHT
• RideDist: Setting riding distance.
• Watch SET
Set the distance you are going to ride and the cycling computer will estimate your arrival time
Press RIGHT
to the destination according to your riding speed.
• User SET
Press RIGHT
• A.Lap: Automatic lap recording.
• General SET
Set the distance for the automatic lap and the cycling computer will record the lap
information every time you reach this distance. For example, if you set 1 km/m,
the cycling computer will record lap information every kilometer or mile.
Both functions work during your exercise recording. For further information, see pages 20-23.
1. In the Time mode, press the RIGHT button until SETTINGS is displayed.
2. Press the MIDDLE button. Cycling SET is displayed.
3. Continue by pressing the MIDDLE button and follow the steps below:
The display reads: Press the RIGHT button to set the flashing value
RIGHT
4. RideDist
On / OFF • Turn the riding distance function on or off.
5. RideDist RIGHT
On • Adjust the kilometers or miles.
6. A.Lap RIGHT
On / OFF • Turn the automatic lap recording function on
7. A.Lap RIGHT
On • Adjust the kilometers or miles.
• To return to the Time mode, press and hold the LEFT button.
38 – ENGLISH

AUTOMATIC LAP RECORDING SETTINGS (CYCLING SET)

or off.
ENGLISH
Press the MIDDLE button to accept
the value
MIDDLE
(Skip step 5, if you turned the function off)
MIDDLE
MIDDLE
(Skip step 7, if you turned the function off)
MIDDLE
ENG
– 37