Network Configuration Examples; Design Concepts For Using The Switch - Cisco Catalyst 3750-E Software Configuration Manual

Chapter 1 Overview
•
•
•
•
•
•
•
•
•
•
•
•

Network Configuration Examples

This section provides network configuration concepts and includes examples of using the switch to
create dedicated network segments and interconnecting the segments through Gigabit Ethernet and
10-Gigabit Ethernet connections.
•
•
•
•
•

Design Concepts for Using the Switch

As your network users compete for network bandwidth, it takes longer to send and receive data. When
you configure your network, consider the bandwidth required by your network users and the relative
priority of the network applications that they use.
Table 1-1
network to increase the bandwidth available to your network users.
OL-9775-08
SPAN and RSPAN are disabled. For more information, see
RSPAN."
RMON is disabled. For more information, see
Syslog messages are enabled and appear on the console. For more information, see
"Configuring System Message Logging."
SNMP is enabled (Version 1). For more information, see
No ACLs are configured. For more information, see
with ACLs."
QoS is disabled. For more information, see
No EtherChannels are configured. For more information, see
EtherChannels and Link-State Tracking."
IP unicast routing is disabled. For more information, see
Routing."
No HSRP groups are configured. For more information, see
IP multicast routing is disabled on all interfaces. For more information, see
"Configuring IP Multicast Routing."
MSDP is disabled. For more information, see
Fallback bridging is not configured. For more information, see
Bridging."
"Design Concepts for Using the Switch" section on page 1-19
"Small to Medium-Sized Network Using Catalyst 3750-E and 3560-E Switches" section on
page 1-26
"Large Network Using Catalyst 3750-E and 3560-E Switches" section on page 1-28
"Multidwelling Network Using Catalyst 3750-E Switches" section on page 1-31
"Long-Distance, High-Bandwidth Transport Configuration" section on page 1-32
describes what can cause network performance to degrade and how you can configure your
Chapter 30, "Configuring SPAN and
Chapter 31, "Configuring RMON."
Chapter 33, "Configuring SNMP."
Chapter 35, "Configuring Network Security
Chapter 37, "Configuring QoS."
Chapter 40, "Configuring IP Unicast
Chapter 42, "Configuring HSRP."
Chapter 47, "Configuring MSDP."
Catalyst 3750-E and 3560-E Switch Software Configuration Guide
Network Configuration Examples
Chapter 32,
Chapter 38, "Configuring
Chapter 46,
Chapter 48, "Configuring Fallback
1-19