Cisco Catalyst 3750-E Software Configuration Manual page 272

Configuring the Switch for Local Authentication and Authorization
Command
Step 5
aaa authorization network local
Step 6
username name [privilege level]
{password encryption-type password}
Step 7 end
Step 8 show running-config
Step 9 copy running-config startup-config
To disable AAA, use the no aaa new-model global configuration command. To disable authorization,
use the no aaa authorization {network | exec} method1 global configuration command.
Note To secure the switch for HTTP access by using AAA methods, you must configure the switch with the
ip http authentication aaa global configuration command. Configuring AAA authentication does not
secure the switch for HTTP access by using AAA methods.
For more information about the ip http authentication command, see the Cisco IOS Security Command
Reference, Release 12.2.
Catalyst 3750-E and 3560-E Switch Software Configuration Guide
9-44
Purpose
Configure user AAA authorization for all network-related service
requests.
Enter the local database, and establish a username-based authentication
system.
Repeat this command for each user.
• For name, specify the user ID as one word. Spaces and quotation
marks are not allowed.
• (Optional) For level, specify the privilege level the user has after
gaining access. The range is 0 to 15. Level 15 gives privileged EXEC
mode access. Level 0 gives user EXEC mode access.
For encryption-type, enter 0 to specify that an unencrypted password
•
follows. Enter 7 to specify that a hidden password follows.
For password, specify the password the user must enter to gain access
•
to the switch. The password must be from 1 to 25 characters, can
contain embedded spaces, and must be the last option specified in the
username command.
Return to privileged EXEC mode.
Verify your entries.
(Optional) Save your entries in the configuration file.
Chapter 9 Configuring Switch-Based Authentication
OL-9775-08