Displaying Ip Source Guard Information - Cisco Catalyst 3750-E Software Configuration Manual

Hide thumbs Also See for Catalyst 3750-E:
Table of Contents

Advertisement

Chapter 22
Configuring DHCP Features and IP Source Guard
Switch(config-if)# ip device tracking maximum 8
Switch(config-if)# ip verify source tracking
Switch# show ip device tracking all
IP Device Tracking = Enabled
IP Device Tracking Probe Count = 3
IP Device Tracking Probe Interval = 30
---------------------------------------------------------------------
IP Address
---------------------------------------------------------------------
40.1.1.24
40.1.1.20
40.1.1.21
40.1.1.22
40.1.1.23
The output shows the five valid IP-MAC bindings that have been learned on the interface Fa0/3. For the
private VLAN cases, the bindings are associated with primary VLAN ID. So, in this example, the
primary VLAN ID, 200, is shown in the table.
Switch# show ip verify source
Interface
---------
Gi1/0/3
Gi1/0/3
Gi1/0/3
Gi1/0/3
Gi1/0/3
Gi1/0/3
Gi1/0/3
Gi1/0/3
Gi1/0/3
Gi1/0/3
The output shows that the five valid IP-MAC bindings are on both the primary and secondary VLAN.

Displaying IP Source Guard Information

Table 22-3
Commands for Displaying IP Source Guard Information
Command
show ip source binding
show ip verify source
Understanding DHCP Server Port-Based Address Allocation
DHCP server port-based address allocation is a feature that enables DHCP to maintain the same IP
address on an Ethernet switch port regardless of the attached device client identifier or client hardware
address.
When Ethernet switches are deployed in the network, they offer connectivity to the directly connected
devices. In some environments, such as on a factory floor, if a device fails, the replacement device must
be working immediately in the existing network. With the current DHCP implementation, there is no
OL-9775-08
MAC Address
Vlan
0000.0000.0304
200
0000.0000.0305
200
0000.0000.0306
200
0000.0000.0307
200
0000.0000.0308
200 GigabitEthernet1/0/3
Filter-type
Filter-mode
-----------
-----------
ip trk
active
ip trk
active
ip trk
active
ip trk
active
ip trk
active
ip trk
active
ip trk
active
ip trk
active
ip trk
active
ip trk
active
Purpose
Display the IP source bindings on a switch.
Display the IP source guard configuration on the switch.
Interface
GigabitEthernet1/0/3
GigabitEthernet1/0/3
GigabitEthernet1/0/3
GigabitEthernet1/0/3
IP-address
Mac-address
---------------
-----------------
40.1.1.23
40.1.1.24
40.1.1.20
40.1.1.21
40.1.1.22
40.1.1.23
40.1.1.24
40.1.1.20
40.1.1.21
40.1.1.22
Catalyst 3750-E and 3560-E Switch Software Configuration Guide
Displaying IP Source Guard Information
STATE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
Vlan
----
200
200
200
200
200
201
201
201
201
201
22-25

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Catalyst3560-e

Table of Contents