Cisco Catalyst 3750-E Software Configuration Manual page 1074

Configuring Protocol-Independent Features
Command
Step 3
match as-path path-list-number
Step 4 match community-list
community-list-number [exact]
Step 5 match ip address {access-list-number |
access-list-name} [...access-list-number |
...access-list-name]
Step 6
match metric metric-value
Step 7 match ip next-hop {access-list-number |
access-list-name} [...access-list-number |
...access-list-name]
Step 8
match tag tag value [...tag-value]
Step 9 match interface type number [...type
number]
Step 10 match ip route-source
{access-list-number | access-list-name}
[...access-list-number |
...access-list-name]
Step 11
match route-type {local | internal |
external [type-1 | type-2]}
Step 12
set dampening halflife reuse suppress
max-suppress-time
Step 13 set local-preference value
Step 14 set origin {igp | egp as | incomplete}
Step 15 set as-path {tag | prepend
as-path-string}
Step 16 set level {level-1 | level-2 | level-1-2 |
stub-area | backbone}
Step 17 set metric metric value
Catalyst 3750-E and 3560-E Switch Software Configuration Guide
40-96
Purpose
Match a BGP AS path access list.
Match a BGP community list.
Match a standard access list by specifying the name or number. It can be
an integer from 1 to 199.
Match the specified route metric. The metric-value can be an EIGRP
metric with a specified value from 0 to 4294967295.
Match a next-hop router address passed by one of the access lists
specified (numbered from 1 to 199).
Match the specified tag value in a list of one or more route tag values.
Each can be an integer from 0 to 4294967295.
Match the specified next hop route out one of the specified interfaces.
Match the address specified by the specified advertised access lists.
Match the specified route-type:
• local—Locally generated BGP routes.
internal—OSPF intra-area and interarea routes or EIGRP internal
•
routes.
• external—OSPF external routes (Type 1 or Type 2) or EIGRP
external routes.
Set BGP route dampening factors.
Assign a value to a local BGP path.
Set the BGP origin code.
Modify the BGP autonomous system path.
Set the level for routes that are advertised into the specified area of the
routing domain. The stub-area and backbone are OSPF NSSA and
backbone areas.
Set the metric value to give the redistributed routes (for EIGRP only).
The metric value is an integer from -294967295 to 294967295.
Chapter 40 Configuring IP Unicast Routing
OL-9775-08