Table of Contents
Advertisement
AUDIO
Radio operation
(a) Listening to the radio
Push the "ON/SOURCE" button to choose either an AM or
FM station.
"AM", "FM1" or "FM2" appears on the display.
If the front audio system receives a traffic announcement (TA)
while the rear seat audio system is in the radio mode, "TRAF"
will flash on the screen and the rear seat audio system will turn
off. When the front audio receives a traffic announcement (TA),
the rear seat audio system cannot select the AM/FM mode.
280
(b) Selecting a station
Tune in the desired station using one of the following methods.
Seek tuning: Push and hold the "
button. The radio will begin seeking up or down for a station
of the nearest frequency and will stop on reception. Each time
you push the button, the stations will be searched out one after
another.
Manual tuning: Quickly push and release the "
(TUNE/TRACK) button. The radio will step up or down to
another frequency.
To scan the preset stations: Push the "
(DISC/CH/PROG) button. The radio will tune in the next preset
station up the band, stay there for a few seconds, and then
move to the next preset station. To select a station, push the
"SCAN" button a second time.
You can scan only the preset stations for the band of the front
audio system. (For instructions, see "(b) Presetting a station"
on page 252.)
" or "
" (TUNE/TRACK)
" or "
"
" or "
"
Advertisement
Table of Contents
