Table of Contents
Advertisement
OCCUPANT RESTRAINT SYSTEMS
D Be careful not to damage the belt webbing or
hardware. Take care that they do not get caught or
pinched in the seat or doors.
D Inspect the belt system periodically. Check for cuts,
fraying, and loose parts. Damaged parts should be
replaced. Do not disassemble or modify the system.
D Keep the belts clean and dry. If they need cleaning,
use a mild soap solution or lukewarm water. Never
use bleach, dye, or abrasive cleaners, or allow them
to come into contact with the belt — they may
severely weaken the belts.
interior" on page 611 for instructions.)
D Replace the belt assembly (including bolts) if it has
been used in a severe impact. The entire assembly
should be replaced even if damage is not obvious.
140
(See "Cleaning the
Advertisement
Table of Contents
