Table of Contents
Advertisement
OCCUPANT RESTRAINT SYSTEMS
"
1
Airbag module for front passenger
(airbag and inflator)
SRS warning light
2
3
Airbag module for driver (airbag and inflator)
4
Driver's seat position sensor
5
Driver's seat belt buckle switch
Front airbag sensors
6
7
Airbag sensor assembly
The SRS front airbag system consists mainly of the above
components, and their locations are shown in the illustration.
The airbag sensor assembly consists of a safing sensor and
airbag sensor.
158
The
airbag
sensors
constantly
deceleration of the vehicle. If an impact results in a forward
deceleration beyond the designed threshold level, the system
triggers the airbag inflators. At this time a chemical reaction in
the inflators very quickly fills the airbags with non-toxic gas to
help restrain the forward motion of the occupants. The front
airbags then quickly deflate, so that there is no obstruction of
the driver's vision should it be necessary to continue driving.
When the airbags inflate, they produce a loud noise and
release some smoke and residue along with non-toxic gas.
This does not indicate a fire. This smoke may remain inside the
vehicle for some time, and may cause some minor irritation to
the eyes, skin or breathing. Be sure to wash off any residue as
soon as possible to prevent any potential skin irritation with
soap and water. If you safely exit from the vehicle, you should
do so immediately.
monitor
the
forward
Advertisement
Table of Contents
