Programming Other Devices; Reprogramming A Button; Operating The Homelink; Erasing The Entire Homelink Memory - Lexus GX470 2004 Owner's Manual

Programming other devices

To program other devices such as home security systems,
home door locks or lighting, contact your authorized Lexus
dealer for assistance.

Reprogramming a button

R
Individual HomeLink buttons cannot be erased, however, to
reprogram a single button, follow the procedure "Programming
R
the HomeLink ".
(b) Operating the HomeLink
R
To operate the HomeLink , press the appropriate HomeLink
button to activate the programmed device. The HomeLink
indicator light should come on. The HomeLink
send the signal for up to 20 seconds as long as the button is
pressed.
(c) Erasing the entire HomeLink
To erase all previously programmed codes at one time, press
and hold down the 2 outside buttons for 20 seconds until the
indicator light flashes.
If you sell your vehicle, be sure to erase the programs stored
in the HomeLink
R
R
R
R
continues to
INTERIOR EQUIPMENT
three programs)
R
memory.
CAUTION
D When programming the HomeLink
Transceiver, you may be operating a garage door or
other device. Make sure people and objects are out
of the way of the garage door or other device to
prevent potential harm or damage.
R
D Do not use this HomeLink
with any garage door opener that lacks the safety
stop and reverse feature as required by federal safety
standards. (This includes any garage door opener
model manufactured before April 1, 1982.) A garage
door opener which cannot detect an object (signaling
the door to stop and reverse), does not meet current
federal safety standards. Using a garage door opener
without these features increases risk of serious
injury or death.
R
memory (all
R
Universal
Universal Transceiver
91