Table of Contents
Advertisement
AUDIO
Cassette tape player operation
(a) Playing a cassette tape
When you insert a cassette tape, the exposed tape should
face to the right.
The player will automatically start when you insert a cassette
tape. At this time, "TAPE" appears on the display.
To stop or eject the cassette tape, push the "EJECT" button.
Auto-reverse feature: After the cassette player reaches the
end of a tape, it automatically reverses and begins to play the
other side, regardless of whether the cassette was playing or
fast forwarding.
256
If a cassette is already in the slot, push the "TAPE" button.
Dolbyr Noise Reduction* feature: If you are listening to a
tape that was recorded with Dolbyr Noise Reduction, push the
button. The display will indicate that the Dolby noise
reduction system is on.
The Dolby NR mode reduces tape noise by about 10 dB. For
best sound reproduction, play your tapes with the Dolby NR on
or off according to the mode used for recording the tape.
To play a tape recorded without Dolby NR, push the button
again to turn off the Dolby NR.
* Dolby noise reduction manufactured under license from Dolby
Laboratories Licensing Corporation.
symbol
are trademarks of Dolby Laboratories Licensing
Corporation.
"DOLBY" and the double-D
Advertisement
Table of Contents
