Table of Contents
Advertisement
AIR CONDITIONING
If quick heating or cooling is desired —
Push the "TEMP" or "PASSENGER TEMP" button on either
side and hold it until "MAX. HOT" or "MAX. COLD" appears on
the display.
If manual fan speed control is desired —
"
Fan speed at low
1
The fan speed can be set to your desired speed by pushing the
appropriate side of fan speed control button. The higher the fan
speed is, the more air is delivered. Pushing the "OFF" button
turns off the fan.
To remove exterior windshield frost, use the high speed setting.
230
Fan speed at high
2
If manual switching of air intake is desired —
Each time you push the air intake control button, the mode
changes in order from the RECIRCULATED AIR mode to
OUTSIDE AIR mode, then back to the RECIRCULATED AIR
mode. Each indicator light shows which mode is now selected.
1
RECIRCULATED AIR mode — If quick circulation of
cooled air is desired, select this mode.
2
OUTSIDE AIR mode — The system will take fresh
outside air into the vehicle.
To prevent fogging up of the windshield, the air intake mode
may change automatically to the OUTSIDE AIR mode
depending on the condition of the air conditioning system.
For example, when the ambient temperature is low, the air
intake mode may change automatically to the OUTSIDE AIR
mode. This is not a malfunction.
Advertisement
Table of Contents
