Siemens SIMATIC ET 200SP Manual page 28

Parameter data record
A.2 Parameter assignment and structure of the parameter data record
Codes for output types
The following table contains the codes for the output types of the analog output module. You
enter this coding in byte x (see previous figure).
Table A- 1
Output type
Deactivated
Current
Codes for output ranges
The following table contains the codes for the output ranges of the analog output module.
You enter these codes in byte x+1 of data record 128 (see previous figure).
Table A- 2
Output range
Current
±20 mA
0 mA to 20 mA
4 mA to 20 mA
Value range for substitute value
The following table contains the value ranges for the substitute values. You must enter the
corresponding codes in bytes x+4 and x+5 (see previous figure).
Output range
Current
±20 mA
0 mA to 20 mA
4 to 20 mA
28
Codes for output types
Codes for output ranges
Code
0000 0000
0000 0011
Code
0000 0000
0000 0001
0000 0010
Permissible value range
-29031 to 29030
0 to 29030
-692 to 29376
Analog output module AQ 2xI ST (6ES7135-6GB00-0BA1)
Manual, 12/2015, A5E36104864-AA