Siemens SIMATIC ET 200SP Manual page 24

Technical specifications
6.1 Technical specifications
Interrupts/diagnostics/status information
Substitute values can be applied
Interrupts
Diagnostics interrupt
Diagnostics alarms
Diagnostics
Monitoring of the supply voltage
Wire break
Group error
Overflow/underflow
Diagnostics indicator LED
Monitoring of the supply voltage (PWR LED)
Channel status display
For channel diagnostics
For module diagnostics
Electrical isolation
Electrical isolation of channels
Between the channels
Between the channels and backplane bus
Between the channels and voltage supply of the
electronics
Permitted potential difference
Between different circuits
Isolation
Isolation tested with
Environmental conditions
Ambient temperature in operation
Horizontal installation, min.
Horizontal installation, max.
Vertical installation, min.
Vertical installation, max.
Dimensions
Width
Weights
Weight, approx.
Dimension drawing
See manual ET 200SP BaseUnits
(http://support.automation.siemens.com/WW/view/en/59753521)
24
6ES7135-6GB00-0BA1
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes; green PWR LED
Yes; green LED
No
Yes; green/red DIAG LED
No
Yes
Yes
75 V DC / 60 V AC (basic isolation)
707 V DC (type test)
0 ℃
60 ℃
0 ℃
50 ℃
15 mm
31 g
Analog output module AQ 2xI ST (6ES7135-6GB00-0BA1)
Manual, 12/2015, A5E36104864-AA