Table of Contents
Advertisement
4. User
Authentication
5. System Utility
6. Save Runtime
Configuration
8. Priority Tag
1. System Restart
2. Default Factory Reset
3. Timeout Interval Setup
4. TFTP Download
5. Local Transfer
6. Ping
7. Search Location by
Port Name
- 14 -
Define the 802.1p tag mapping and the
service rule. Please refer to section 4.13
for detail.
This menu allows you to configure the
password of root, admin and guest
account. Only root account has the right
to enter this menu.
Restart the switch.
available: cold start and warm start.
Reset the switch back to factory default
settings.
Configure the telnet timeout interval.
Update the firmware through TFTP
server.
Transfer the firmware from master switch
to slave switch.
Ping a IP to test the connection status.
Input
a
port
name
correspondence of Device ID and Port
number.
Save the configuration you have make on
the switch.
Two options are
to
get
the
Advertisement
Table of Contents
