Set Up Vlans On Wx Switches - 3Com 3CRWX120695A User Manual

66 C 3: C
HAPTER ONFIGURING
W S
IRELESS ERVICES
6 Click Choose Available and select the RADIUS server group from the
dropdown list.
7 Click Finish to close the Modify AAA wizard.

Set Up VLANs on WX Switches

WX switches in a Mobility Domain contain a user's traffic within the
VLAN the user is assigned to. For example, if you assign a user to VLAN
red, the WX switches in the Mobility Domain contain the user's traffic
within VLAN red configured on the switches. The VLANs you set up for
service sets support wireless users—they don't serve as management
VLANs.
If an WX is connected to the network by only one IP subnet, the WX must
have at least one VLAN configured. Optionally, each VLAN can have its
own IP address. However, no two IP addresses on the switch can belong
to the same IP subnet. User VLANs must be defined on at least on WX
switch within the Mobility Domain.