Install The Equipment; What's Next - 3Com 3CRWX120695A User Manual

142 C 6: U
HAPTER SING
Install the
Equipment

What's Next?

RF P
LANNING
5 To select the directory to which the work order report is saved, click
Choose. The Select dialog box appears.
6 Click Generate Work Order. The work order is saved in the directory
you specified in the format WO_scope_name_date. If you generate
another order for the same scope on the same day, the old work order is
overwritten.
7 After the work order is generated, click the View Work Order button.
A browser window opens to display the work order in HTML format.
After you print the work order from 3WXM, you can distribute it to your
installers. The work order shows where to install the 3Com equipment. If
you have specified third-party APs in the network plan, those will be
considered in the work order, too.
For more information about installing the equipment, see "Equipment
Installation" on page 42.
A 3WXM network plan can support both RF Auto-Tuning and RF
Planning techniques at the same time. You can use RF Auto-Tuning to
meet the demands of rapid network changes that can be caused by a
greater or lesser number of users, or by a physical blockage of MAPs. You
are alerted when changes occur in your network of this nature.
To fine tune your network's RF coverage area and performance, see
Chapter 8, "Optimizing a Network Plan," on page 99.
To deploy your network plan and enable and configure monitoring,
see "Managing and Monitoring Your Network" on page 143.