Speed Dial/Conf - Mitel 6920 User Manual

3. In the Type field, select Speed Dial/Xfer.
4. In the Label field, enter a label for the Speed Dial/Xfer key.
5. In the Value field, enter the speed dial extension or the extension to transfer calls to (for example,
3600).
6. In the Line field, select the line for which you want to use the key functionality.
Valid values are:
• global
• 1 through 24
7. In the state fields, check (enable) or uncheck (disable) the states you want to apply to this softkey.
Expansion Module Keys
8. Select from Key 1 through Key 84 (M695).
9. In the Type field, select Speed Dial/Xfer.
10. In the Value field, enter the speed dial extension or the extension to transfer calls to (for example,
3600).
11. In the Line field, select the line for which you want to use the key functionality.
Valid values are:
• global
• 1 through 24
12. Click Save Settings.

Speed Dial/Conf

The 6920 allows you to configure a softkey or expansion module key to be used as a speed dial
conference key (Speed Dial/Conf key) while remaining in the current call. This key allows a user
on a call to conference another party at a pre-defined number while remaining in the call.
For example, while on an active call, an user can use the Speed Dial/Conf key to dial a recording
service and have the resulting conference recorded.
Note: If currently in a conference, the Speed Dial/Conf key is disabled on the active call.
If you configure a softkey or expansion module key as a Speed Dial/Conf key and you press this
key while on an active call, the focused line changes to the dialing line. A Cancel softkey displays
on the phone allowing you to abort the conference speed dial if required.
Note: This feature is not compatible with centralized conferencing.
Configuring Softkeys
xci