Configuring Park/Pickup Keys Using The Mitel Web Ui - Mitel 6920 User Manual

• After the call is parked, you can press the Pickup key, followed by the applicable value to pickup
the call
Administrators can configure the Park and Pickup keys for any line using the configuration files or
the Mitel Web UI.
Users can make changes to customize the label of the Park and Pickup keys using the Web UI.

Configuring Park/Pickup Keys Using the Mitel Web UI

1. Click on Operation > Softkeys and XML.
or
Click on Operation > Expansion Module <N>.
Softkeys
2. Select from Key 1 through Key 20 on the Top keys.
or
Select from Key 1 through Key 18 on the Bottom keys.
3. In the Type field, select Park.
4. In the Label field, enter a label for the Park softkey.
Note: The Value and Line fields are configured by the Administrator.
5. In the state fields, check (enable) or uncheck (disable) the Connected state for this softkey.
6. Select from Key 1 through Key 20.
7. In the Type field, select Pickup
8. In the Label field, enter a label for the Pickup softkey.
Note: The Value and Line fields are configured by the Administrator.
9. In the state fields, check (enable) or uncheck (disable) the states you want to apply to this softkey.
10. Click Save Settings.
11. Click on Reset, then click Restart to restart the IP phone and apply the changes.
Configuring Softkeys
lxxxv