Configuring A Paging Key Using The Mitel Web Ui - Mitel 6920 User Manual

Configuring a Paging Key Using the Mitel Web UI

1. Click on Operation > Softkeys and XML.
or
Click on Operation > Expansion Module <N>.
Softkeys
2. Select from Key 1 through Key 20 on the Top keys.
or
Select from Key 1 through Key 18 on the Bottom keys.
3. In the Type field, select Paging.
4. In the Label field, enter a label to apply to this key.
5. In the Value field, enter a multicast IP address and a port number for the Paging key. When
you press this key, the phone initiates an outgoing multicast RTP session to the specified address
using the specified port (e.g. 239.0.1.15:10000).
Notes:
1. When you select Paging for the Type field, the Line field is disabled.
2. The Value field allows for one multicast address entry only.
6. To receive RTP steams for group paging, you must also configure the Paging Listen Addresses
parameter at the path, Basic Settings > Preferences > Group Paging RTP Settings.
Expansion Module Keys
7. Select from Key 1 through Key 84 (M695).
8. In the Type field, select Paging.
9. In the Value field, enter a multicast IP address and a port number for the Paging key. When you
press this key, the phone initiates an outgoing multicast RTP session to the specified address
using the specified port. (For example, 239.0.1.15:10000).
Notes:
1. When you select Paging for the Type field, the Line field is disabled.
2. The Value field allows for one multicast address entry only.
10. To receive RTP steams for group paging, you must also configure the Paging Listen Addresses
parameter at the path, Basic Settings > Preferences > Group Paging RTP Settings.
11. Click Save Settings to save your changes
Configuring Softkeys
ciii