To Activate; To Set A Desired Speed - Dodge Challenger 2018 User Manual

The Speed Control buttons are located on the
right side of the steering wheel.
Speed Control Switches
1 — Push Cancel
2 — Push Set+/Accel
3 — Push Resume
4 — Push On/Off
5 — Push Set-/Decel
NOTE:
In order to ensure proper operation, the Speed
Control System has been designed to shut down
if multiple Speed Control functions are operated
at the same time. If this occurs, the Speed
Control System can be reactivated by pushing
the Speed Control on/off button and resetting
the desired vehicle set speed.

To Activate

Push the on/off button to activate the Speed
Control. "CRUISE CONTROL READY" will ap-
pear in the instrument cluster display to indi-
cate the Speed Control is on. To turn the system
off, push the on/off button a second time.
"CRUISE CONTROL OFF" will appear in the
instrument cluster display to indicate the Speed
Control is off. The system should be turned off
when not in use.
WARNING!
Leaving the Speed Control system on when
not in use is dangerous. You could acciden-
tally set the system or cause it to go faster
than you want. You could lose control and
have an accident. Always leave the system
OFF when you are not using it.

To Set A Desired Speed

Turn the Speed Control on. When the vehicle
has reached the desired speed, push the SET
(+) or SET (-) button and release. Release the
accelerator and the vehicle will operate at the
selected speed. Once a speed has been set, a
message "CRUISE CONTROL SET TO MPH
(km/h)" will appear indicating what speed was
set. A cruise indicator lamp, along with set
speed will also appear and stay on in the instru-
ment cluster when the speed is set.
121