Dodge Challenger 2018 User Manual page 197

Component
Engine Oil – 6.4L Engine
Engine Oil Filter
Spark Plugs
Fuel Selection – 3.6 Engine
Fuel Selection – 5.7 Engine With Automatic Transmission
Fuel Selection – 6.4L Engine & 5.7 Engine With Manual Transmission
CAUTION!
• Mixing of engine coolant (antifreeze) other
than specified Organic Additive Technol-
ogy (OAT) engine coolant (antifreeze), may
result in engine damage and may decrease
corrosion protection. Organic Additive
Technology (OAT) engine coolant is differ-
ent and should not be mixed with Hybrid
Organic Additive Technology (HOAT) en-
gine coolant (antifreeze) or any "globally
compatible" coolant (antifreeze). If a non-
Fluid, Lubricant, or Genuine Part
For best performance and maximum protection under all types of operating
conditions, the manufacturer only recommends full synthetic engine oils.
The manufacturer recommends the use of Pennzoil Ultra Platinum 0W-
40 or equivalent Mopar engine oil meeting the requirements of FCA Mate-
rial Standard MS-12633 for use in all operating temperatures.
We recommend you use Mopar Engine Oil Filters.
We recommend you use Mopar Spark Plugs.
87 Octane, 0-15% Ethanol.
89 Octane recommended – 87 Octane acceptable, 0-15% Ethanol.
91 Octane or higher, 0-15% Ethanol.
CAUTION!
OAT engine coolant (antifreeze) is intro-
duced into the cooling system in an emer-
gency, the cooling system will need to be
drained, flushed, and refilled with fresh
OAT coolant (conforming to MS.90032),
by an authorized dealer as soon as pos-
sible.
• Do not use water alone or alcohol-based
engine coolant (antifreeze) products. Do
not use additional rust inhibitors or anti-
CAUTION!
rust products, as they may not be compat-
ible with the radiator engine coolant and
may plug the radiator.
• This vehicle has not been designed for use
with propylene glycol-based engine cool-
ant (antifreeze). Use of propylene glycol-
based engine coolant (antifreeze) is not
recommended.
195