To Resume Speed; To Deactivate; Adaptive Cruise Control (Acc); Activation - Dodge Challenger 2018 User Manual

On steep hills, a greater speed loss or gain may
occur so it may be preferable to drive without
Speed Control.
WARNING!
Speed Control can be dangerous where the
system cannot maintain a constant speed.
Your vehicle could go too fast for the condi-
tions, and you could lose control and have an
accident. Do not use Speed Control in heavy
traffic or on roads that are winding, icy, snow-
covered or slippery.

To Resume Speed

To resume a previously set speed, push the RES
button and release. Resume can be used at any
speed above 20 mph (32 km/h).

To Deactivate

A soft tap on the brake pedal, pushing the CANC
button, or normal brake pressure while slowing
the vehicle will deactivate the Speed Control
without erasing the set speed from memory.
Pushing the on/off button or turning the ignition
switch OFF erases the set speed from memory.

ADAPTIVE CRUISE CONTROL (ACC)

Adaptive Cruise Switches
1 — Adaptive Cruise Control (ACC) On/
Off
2 — Distance Setting – Decrease
3 — Distance Setting – Increase
If your vehicle is equipped with Adaptive Cruise
Control, the controls operate exactly the same
as Speed Control with only a couple of differ-
ences. With this option, you can set a specified
distance you would like to maintain between
you and the vehicle in front of you.
If the ACC sensor detects a vehicle ahead, ACC
will apply limited braking or acceleration auto-
matically to maintain a preset following dis-
tance, while matching the speed of the vehicle
ahead.
If the sensor does not detect a vehicle ahead of
you, ACC will maintain a fixed set speed.

Activation

Push and release the Adaptive Cruise Control
(ACC) on/off button.
"ACC READY" will appear in the instrument
cluster display to indicate the ACC is on.

To Set A Desired ACC Speed

When the vehicle reaches the speed desired,
push the SET (+) button or the SET (-) button
and release. The instrument cluster display will
display the set speed.
123