Dodge Challenger 2018 User Manual page 53

Left And Right Arrow Buttons:
Using the left or right arrow button allows you to
cycle through the submenu items of the Main
menu item.
NOTE:
• Holding the up/down or left/right arrow button
will loop the user through the currently se-
lected menu or options presented on the
screen.
• Main menu and submenu's wrap for continu-
ous scrolling.
• Upon returning to a main menu, the last
submenu screen viewed within that main
menu will be displayed.
OK Button:
For Digital Speedometer:
• Pushing the OK button changes units (MPH
or km/h).
For Screen Setup:
• OK button allows user to enter menu and
submenus.
• Within each submenu layer, the up and down
arrows will allow the user to select the item of
interest.
• Pushing the OK button makes the selection
and a confirmation screen will appear (return-
ing the user to the 1st page of the submenu).
• Pushing the left arrow button will exit each
submenu layer and return to the main menu.
For the Trip and Fuel Economy menus (and new
Performance Timers):
• Information is reset by pushing and holding
the OK button.
Engine Oil Life Reset
Oil Change Required
Your vehicle is equipped with an engine oil
change indicator system. The "Oil Change Re-
quired" message will display in the instrument
cluster display for five seconds after a single
chime has sounded, to indicate the next sched-
uled oil change interval. The engine oil change
indicator system is duty cycle based, which
means the engine oil change interval may fluc-
tuate, dependent upon your personal driving
style.
Unless reset, this message will continue to dis-
play each time you place the ignition in the
ON/RUN position. To turn off the message tem-
porarily, push and release the OK or arrow but-
tons. To reset the oil change indicator system
(after performing the scheduled maintenance),
refer to the following procedure.
Vehicles Equipped With Keyless Enter-N-Go —
Ignition
Use the steering wheel instrument cluster dis-
play controls for the following procedure(s):
1. Without pressing the brake pedal, push the
ENGINE START/STOP button and place the
ignition in the ON/RUN position (do not start
the engine).
2. Push and release the down arrow button to
scroll downward through the main menu to
"Vehicle Info."
3. Push and release the right arrow button to
access the "Oil Life" screen.
51