Speed Control - If Equipped; To Activate; To Set A Desired Speed - Dodge CHALLENGER 2020 Owner's Manual

176 STARTING AND OPERATING
SPEED CONTROL — IF EQUIPPED
When engaged, the Speed Control takes over
accelerator operations at speeds greater than
25 mph (40 km/h) or 20 mph (32 km/h),
depending on engine size and axle ratio.
The Speed Control buttons are located on the
right side of the steering wheel.
Speed Control Buttons
1 — On/Off
2 — SET (+)/Accel
3 — RES/Resume
4 — SET (-)/Decel
5 — CANC/Cancel
NOTE:
In order to ensure proper operation, the Speed
Control System has been designed to shut down
if multiple Speed Control functions are operated
at the same time. If this occurs, the Speed
Control System can be reactivated by pushing
the Speed Control on/off button and resetting
the desired vehicle set speed.
T A
O CTIVATE
Push the on/off button to activate the Speed
Control. "CRUISE CONTROL READY" will appear
in the instrument cluster display to indicate the
Speed Control is on. To turn the system off,
push the on/off button a second time. "CRUISE
CONTROL OFF" will appear in the instrument
cluster display to indicate the Speed Control is
off. The system should be turned off when not
in use.
WARNING!
Leaving the Speed Control system on when
not in use is dangerous. You could
accidentally set the system or cause it to go
faster than you want. You could lose control
and have an accident. Always leave the
system OFF when you are not using it.
T S A D S
O ET ESIRED PEED
Turn the Speed Control on. When the vehicle has
reached the desired speed, push the SET (+) or SET
(-) button and release. Release the accelerator and
the vehicle will operate at the selected speed. Once
a speed has been set, a message "CRUISE
CONTROL SET TO MPH (km/h)" will appear
indicating what speed was set. A cruise indicator
lamp, along with set speed will also appear and stay
on in the instrument cluster when the speed is set.