Viessmann VITOCROSSAL 200 Instructions Manual page 6

Commissioning, inspection, maintenance
Steps - commissioning, inspection and...
• •
• •
• •
•
• •
• •
• • •
• •
•
• •
• • •
• •
• •
• • •
• •
•
•
6
Commissioning steps
Inspection steps
Maintenance steps
21. Checking the ignition and ionisation electrodes......... 24
22. Closing the boiler door.................................................. 25
23. Cleaning the burner........................................................ 25
24. Installing the burner....................................................... 26
25. Checking both gas train valves for tightness (for 115
to 311 kW)........................................................................ 27
26. Checking and replacing (if required) the filter
elements in the gas supply pipe.
27. Checking all gas connections for tightness................ 27
28. Checking the gaskets/seals on the flue gas side........ 28
29. Implementing final tests................................................. 29
30. Checking the water quality............................................ 30
31. Checking the function of safety valves
32. Checking the diaphragm expansion vessel and
system pressure............................................................. 31
33. Checking the mixer for obstructions and leaks........... 32
34. Checking the thermal insulation for tight fit
35. Checking the ventilation apertures in the installation
room (only for open flue operation)
36. Instructing the system user........................................... 32
37. Operating and service documents................................ 32
(cont.)
Page