Removing And Replacing The Camera Assembly - Motorola V975 Service Manual

Disassembly

Removing and Replacing the Camera Assembly

G
36
1. Remove the battery cover, battery, SIM, antenna, rear housing, transceiver
board assembly, flip assembly, and flip CLI lens assembly as described in the
procedures.
The FPC (flex) is easily damaged. Exercise extreme care when handling.
2. Use the disassembly tool to unseat the camera assembly flex connector from
its socket (see Figure 22).
Figure 22. Camera Assembly Removal
3. Carefully lift the camera assembly away from the display assembly.
4. To replace, carefully press the camera assembly flex connector into its socket
on the display assembly until fully seated.
5. Replace the flip display assembly, flip assembly, keypad, transceiver board
assembly, rear housing, antenna, SIM, battery, and battery cover as described
in the procedures.
November 12, 2004
Camera Assembly
Camera Assembly
Flex Connector
Disassembly Tool
V975/V980 GSM
040965o
6809490A74-O