Toshiba MMD-AP0186HP-E Service Manual page 48

4
Push the TIME
SET DATA.
Change the value in SET DATA to that of a new address.
5 SET
Push the button to confirm the new address on SET DATA.
6 UNIT LOUVER
Push the
change.
Each time you push the button, the indoor unit numbers in a refrigerant line are indicated
one after another. Only the fan and louvers of the selected indoor unit are activated.
Repeat steps to
4
SET
7
Push the button.
(All the segments on the LCD display light up.)
8
Push the button to finish the procedure.
AMP Air Conditioning
TEMP.
4
FILTER
RESET TEST
8
Finish
5, 7
/ buttons repeatedly to change the value of the indoor unit address in
button (left side of the button) repeatedly to select another address to
to change the indoor unit addresses so as to make each of them unique.
6
ON / OFF
TIMER SET FAN MODE
TIME SAVE VENT
SET CL SWING/FIX UNIT LOUVER
6
Press to finish
setting
– 48 –
www.ampair.co.uk | sales@ampair.co.uk