Toshiba MMD-AP0186HP-E Service Manual page 44

To find an indoor unit's position from its address
When checking unit numbers controlled as a group
(Execute it while the units are stopped.)
The indoor unit numbers in a group are indicated one after another. The fan and louvers of the indicated units
are activated.
1 Push and hold the
ALL ALL ALL ALL ALL
• appears on UNIT No. on the LCD display.
• The fans and louvers of all the indoor units in the group are activated.
UNIT LOUVER
2 Push the
unit numbers are indicated one after another.
• The first-indicated unit number is the address of the header unit.
• Only the fan and louvers of the indicated indoor unit are activated.
3 Push the button to finish the procedure.
All the indoor units in the group stop.
AMP Air Conditioning
TEMP.
TIMER SET
3
Stop
FILTER
RESET TEST SET
1
VENT and buttons at the same time for more than 4 seconds.
button (left side of the button). Each time you push the button, the indoor
ON / OFF
FAN MODE
TIME SAVE VENT
CL SWING/FIX UNIT LOUVER
– 44 –
www.ampair.co.uk | sales@ampair.co.uk
1
2