Honeywell HC900 Reference Manual page 309

REVERSE RELAY OUTPUT (Read Only)
(This is configured automatically when Forward Relay Output is configured)
2
Rack
Address
I/O Module
Address
Channel
Address
Table
continued
FEEDBACK INPUT
N/A
Rack
Address
I/O Module
Address
Channel
Address
*For HC900 controller's 32 Channel DO Module, outputs 17 through 32 may not be used for TPO
(Time Proportioning Output), PPO (Position Proportioning Output) or TPSC (Three Position Step
Output) output types.
Revision 11
2/07
This is the address of the
selected Rack.
Address of selected I/O
module
Channel on selected I/O
Module
This is the address of the
selected Rack.
Address of selected I/O module
Channel on selected I/O Module
HC900 Hybrid Control Designer Function Block Reference Guide
PPO Position Proportional Output Function Block
Same as Forward
Same as Forward
Forward Channel +1
Even number 2 thru 16.*
1 to 5.
1 to 12
1 to 16*
Function Blocks
295