Honeywell HC900 Reference Manual page 3

Abstract
The "Hybrid Control Designer" configuration software program is used for HC900 Controller and Operator
Interface configuration and operates on a PC with Windows 2000 or XP. The software program uses graphic
symbols and line drawing connections to create custom control strategies. Menus are provided in the software to
allow selection of screens for the operator interface and to customize screen access methods and operator keys.
Completed configurations are loaded into the control system using a dedicated communication port in the controller.
References
The following list identifies all documents that may be sources of reference for material discussed in this
publication.
HC900 Controller Technical Overview
HC900 Controller Installation and User Guide
HC900 Operator Interface User Guide
HC900 Hybrid Control Designer User Guide
HC900 Hybrid Controller Communications User Guide
Contacts
World Wide Web
The following lists Honeywell's World Wide Web sites that will be of interest to our customers.
Honeywell Organization
Corporate
Industrial Measurement and Control
IM&C Technical tips
Telephone
Contact us by telephone at the numbers listed below.
United States and Canada
Revision 11
2/07
About This Document
Document Title
Organization
Honeywell
HC900 Hybrid Control Designer Function Block Reference Guide
WWW Address (URL)
http://www.honeywell.com
http://www.hpsweb.honewell.com
http://content.honeywell.com/ipc/faq
Phone Number
1-800-423-9883
1-800-525-7439
Doc ID
51-52-03-31
51-52-25-107
51-52-25-108
51-52-25- 110
51-52-25-111
Tech. Support
Service
iii