Advertisement
Confirm method of operation
Check mode (All lighting FL display)
<Setting method>
"STANDBY/ON" key is pushed while pushing "REC/REC MUTING" key by the stand-by state.
<Release method>
The key to "STANDBY/ON" is pushed.
(Please set the above-mentioned again to light all FL displays again after the check mode is made clear
after pulling out the power cord once.)
All release of set content
All content of the item in the following set is returned to initial state. (State of factory shipment)
<Setting method>
"STANDBY/ON" key is pushed while pushing "REC SOURCE SELECTOR" key by the stand-by state.
[Set items]
The program of the program play is deleted.
The content of the registration of the listening editing and the program editing is deleted.
The repeat setting is turned off.
Release of disc lock
A current unit is set to the CD mechanism unit side.
The play mode of CD mechanism unit is made a normal mode.
The pitch control setting is turned off.
The selection of the recording source is made DIGITAL of CD.
DUB-SPEED setting is made HIGH.
AUTO TRACK setting is turned ON.
TRACK SPACE setting is turned ON.
CONVERTER setting is turned ON.
D-IN SYNCHRO setting is START
FINALIZE setting is OFF
Service menu
The running operation and the version of the firmware can be confirmed by the undermentioned method.
(Does not use excluding "SYSTEM_AGING" and "READ_VERSION" by the item displayed in the service menu.)
<Setting method of service menu>
1."STANDBY/ON" key is pushed while pushing "FINALIZE" key by the stand-by state.
2.When the blinking display of the disc distinction ends, "MENU" key is pushed.
The menu display changes if "MULTI JOG" knob of the main body is turned.
3.The execution of the each item is completed or either "CANCEL"key, "CD-RW STOP"key or "MENU"key
is pushed when going out of the menu mode.
<Release method>
If "STANDBY/ON" key is pushed, and the power supply is turned off once, becomes a normal menu.
CD Mechanism unit
STANDBY/ON key
STANDBY
STANDBY/ON
LEVEL
PHONES
MIN
MAX
REC SOURCE SELECTOR key
(All release of set content)
MENU key
CD-R/RW
(Menu mode ON)
Mechanism unit
OPEN/CLOSE
REC SOURCE
DIGITAL
CD
LINE
PLAY MODE
CD EDIT
CD REC
REC SOURCE
STOP
PLAY
PAUSE
SELECTOR
FL Display
SET key
(Execution)
OPEN/CLOSE
MIC
SYNCHRO
MENU
SET
CANCEL
MIX
REC/
FINALIZE
STOP
PLAY
PAUSE
REC MUTING
MIC
FINALIZE key
STOP key
(Service menu)
(Release of menu mode)
XL-R2010BK
CANCEL key
(Release of menu mode)
MULTI JOG knob
MULTI JOG/REC LEVEL
(Service menu display switch)
-
+
LINE
CD
MIC
LINE
REC/REC MUTING key
(All lighting FL display)
1-17
Advertisement
