JVC XL-R2010BK Service Manual page 11

Removing the mic board / jog dial board
1. Pull out the jog dial knob and the mix balance knob
on the front panel assembly.
2. Remove the two screws O attaching the mic board
bracket and the three screws P attaching the jog dial
board. Remove the mic board and the jog dial board
at the same time.
3. Pull out the stopper attaching the mic board bracket
in the direction of the arrow.
Removing the front board (See Fig.25)
1. Remove the nine screws Q on the back of the front
panel assembly.
(See Fig.22 to 24)
Front panel assembly
Jog dial knob
Jog dial board
P
O
Mic board
Jog dial board
Mic board bracket
Stopper
Front panel assembly
Q
Q Front board
XL-R2010BK
Mic board
Mix balance knob
Fig.22
P
Mic board bracket
O
Fig.23
Mic board
Fig.24
Q
Q
Q
Fig.25
1-11