Page 1
BOOK DIGEST BOOKMARK B.SEARCH SELECT PREV NEXT DESIGNED BY JVC DESIGNED BY JVC For Customer Use: Enter below the Model No. and Serial No. which are located either on the rear, bottom or side of the cabinet. Retain this information for future reference.
Page 2
CAUTION To reduce the risk of electrical shocks, fire, etc.: 1. Do not remove screws, covers or cabinet. 2. Do not expose this appliance to rain or moisture. Caution –– POWER switch and STANDBY/ON This apparatus is provided with a POWER switch to be able to minimize power consumption for safe use. Therefore, 1.
IMPORTANT FOR LASER PRODUCTS REPRODUCTION OF LABELS 1 CLASSIFICATION LABEL, PLACED ON REAR ENCLO- SURE CLASS LASER PRODUCT 1. CLASS 1 LASER PRODUCT 2. DANGER: Invisible laser radiation when open and interlock failed or defeated. Avoid direct exposure to beam. 3.
We would like to thank you for purchasing one of our JVC products. Before connecting this unit to the wall outlet, read the instructions carefully to ensure that you obtain the best possible performance. If you have any questions, consult your JVC dealer.
GENERAL INFORMATION Care and handling of compact discs How to handle CDs When handling a compact disc, do not touch the surface of the disc (reflective silver side –– the side without the label). Since compact discs are made of plastic, they are easily damaged. If a disc gets dirty, dusty, scratched or warped, the sound will not be picked up correctly and, in addition, such a disc may cause the CD player to malfunction.
BEFORE USING FOR THE FIRST TIME Basic connections The Video CD player must be connected directly to a television set or, an amplifier or receiver that is connected to a television or monitor. Select a level, dry location free of dust and vibration, having a temperature maintained between 5 and 35°C (41 and 95°F).
Connecting the AV COMPU LINK cable Connect with other JVC equipment supporting the AV Compulink by using the supplied AV COMPU LINK cable to facilitate operations. See “AV COMPU LINK remote control system” on page 25. AV COMPU LINK cable...
MIC 1 to 3 volume knobs located above. Page 4 on-going operations. The remote control has fourteen unique func- tion buttons in addition to those on the player. XL-MV7000 VIDEO CD PLAYER VOCAL DOLBY EFFECT SURROUND KEY CONTROL...
PROGRAM BOOKMARK B.SEARCH SELECT NEXT DESIGNED BY JVC 4 / ¢ PREV / NEXT buttons (R) During operation with the Playback Control function Invokes previous or next screen. During operation without the Playback Control function Used to skip track(s) forward or backward from the current track being played, or to shift the playing location backward or forward quickly.
BASIC OPERATIONS Now you can play a variety of discs!! Overview of the two play modes The player has two play modes for Video CD and SVCD discs. These are selected by the PLAY MODE switch on the left side of the front panel.
Inserting/removing disc(s) Press the 0 (OPEN/CLOSE) button (1 through 3) to open the disc tray. Then place the disc in the round recess of the tray with label side up. To close the tray, press the 0 (OPEN/CLOSE) button again. If you press the 0 (OPEN/CLOSE) button of the disc which is playing, the player stops and then opens the tray.
BASIC OPERATIONS Stopping play Press the 7 (STOP) button to stop play at any time. Pausing play Press the 8 (PAUSE)/STILL button to temporarily suspend play. STILL Notes • When the 8 (PAUSE)/STILL button is pressed once, “PAUSE” appears on the television screen, the video motion freezes and the sound is turned off.
Slow-motion playback on the remote control unit Press the SLOW button to play in slow-motion. By pressing the SLOW button consecutively, the playback speeds are cycled as shown below. SLOW (Remote control) 1/16 Note • This function can only be used when playing a video CD or SVCD. Using stereo headphones Connecting stereo headphones Connect stereo headphones to the PHONES jack at the lower-left of...
Dolby Sur- round decoder. This mode is the result of research on sound localization technology carried out at JVC for many years and make it possible to reproduce the surround sound with only two front speakers.
Notes • Before the remote control unit leaves the factory, the brand code number is set as No. 01 (JVC). • Depending on your television set’s age and other factors, brand code numbers may be different from those shown in the table. In such a case, try out other codes until you find one that corresponds to your television.
VARIOUS UNIQUE FUNCTIONS Various functions to enhance your enjoyment Display of operations status Preparation This function is controlled by the remote control. Operation Press the ON SCREEN button on the remote control. By pressing the ON SCREEN button, the following information may be easily and quickly displayed or removed from the television screen.
VARIOUS UNIQUE FUNCTIONS Repeating tracks It is possible to repeat playback of all discs or only a single track. Preparation This function is controlled by the remote control. Operation By pressing the REPEAT button on the Remote Control, REPEAT modes are cycled as shown below. REPEAT (Remote control) (Display window)
Playing a multiplex sound CD This function is used for multiplex sound discs. See manuals attached to discs for detail information. Operation By pressing the MPX button consecutively, channel multiplexing modes are cycled as shown below. (Remote control) NORMAL L-CH MONO (left-channel/ right-channel) (Television screen)
VARIOUS UNIQUE FUNCTIONS Viewing the highlights This function is used for a movie Video CD or SVCD. Preparations • When you play a Video CD or SVCD with the Playback Control function, the PLAY MODE switch should be set to PBC OFF. •...
Playback with the Bookmark function Marking segments for later viewing with the Bookmark function The Bookmark function lets you mark segments of a Video CD or SVCD, so that you can have almost instant playback of desired scenes later. You can mark segments on up to ten discs, with a maximum of nine segments per disc.
VARIOUS UNIQUE FUNCTIONS Canceling individual bookmarks 7 Canceling bookmarks set in PBC OFF mode [Method A] 1. In PBC OFF mode, start playing the segment whose bookmark you want to cancel. 2. Press the CANCEL button on the remote control unit. The bookmark for the segment immediately preceding the part you are playing will be canceled.
Using a microphone Using a wired microphone Operation Up to three microphones can be connected to the MIC jacks on the front panel. MIC 1 MIC 2 MIC 3 1. Turn on the microphone switch. 2. Turn the MIC 1, MIC 2, and MIC 3 knobs clockwise (level up) or counterclockwise (level down) as desired.
VARIOUS UNIQUE FUNCTIONS Vocal replace Preparation This function is used for multiplex sound discs. Operation 1. Press the V.REPLACE button during play or stop. REPLACE will appear on the display window and VO.REPLACE will appear on the television screen. When you start singing, the disc vocal is removed and your voice is inserted into the music.
OPERATION OF PLAYBACK CONTROL FUNCTION Playing Video CDs and SVCDs with Playback Control function This player provides a Playback Control function which utilizes a procedure (menu selection) programmed in a Video CD or SVCD. The playback operation procedure may differ depending on the disc you use.
OPERATION OF PLAYBACK CONTROL FUNCTION Video CDs and SVCDs with Playback Control function What is Playback Control function? The Playback Control function, allows you to enjoy menu-driven operation and high-resolution still images which have a resolution four times greater than moving pictures. Example of playback using the Playback Control function Moving Moving...
RESTRICTING USE OF YOUR DISCS Locking a disc with the Read-Protect function Locking a disc The Read-Protect function restricts viewing of a disc. Only people who know the code can unlock the disc. You can lock only Video CDs and SVCDs (up to ten discs).
DIGITAL AUDIO CDs Playing Digital Audio CDs Playing Digital Audio CDs Basically, the operations for Video CDs and SVCDs apply to the Audio CDs except for some video-related functions. Notes • The display has no indicator to show disc type. •...
Video CD player and setup these components’ individually. If, however, the system consists of components which support JVC’s AV COMPU LINK remote control system, instead of individual setup, simply pressing the 3 (PLAY)/SELECT button allows you to enjoy the disc.
SPECIFICATIONS Main specifications XL-MV7000GD Model Video CD player Playback disc Super VCD Video CD Digital Audio CD Front panel XL-MV7000GD color Total harmonic 0.01% (1 kHz) distortion S/N ratio 90 dB Frequency 20 Hz – 20 kHz response Input terminal...
TROUBLESHOOTING Troubleshooting What appears to be a malfunction may not always be so. Please go through the following list before requesting service. Symptom Power does not come on. Power plug is disconnected from AC outlet. The POWER button is in the OFF position. Remote control does not work.
Page 32
AC Power Line Instructions (not applicable for Europe, U.S.A., Canada, Australia and U.K.) IMPORTANT BEFORE PLUGGING IN, check that your AC power line voltage corresponds with the position of the voltage selector switch provided on the outside of this equipment. If different, reset the voltage selector switch, to prevent damage or risk of fire/electric shock.