Front Panel Assembly - JVC XL-R2010BK Service Manual

XL-R2010BK
<Front panel assembly>
Removing the headphone board / power
switch board (See Fig.19 to 21)
1. Pull out the volume knob on the front panel
assembly.
2. Remove the two screws M attaching the headphone
board bracket and the three screws N attaching the
power switch board. Remove the headphone board
and the power switch board at the same time.
3. Pull out the stopper attaching the headphone board
bracket in the direction of the arrow.
1-10

Front panel assembly

Volume knob
Fig.19
M
Fig.20
Power switch board
Headphone board bracket
Stopper
Fig.21
N
Power switch board
Headphone board
M
Headphone board bracket
Headphone board