Analysis of Measurement Results
Search for Target Point of Measurement Value
Search for Target Point of Measurement Value
By using the target search function, you can search for a point that has a specified
measurement value on the trace (target) and move the marker to that point.
Figure 6-10
Target Search Function
Procedure
Step 1. Setting target (target measurement value)
a. Click inside the window of the trace on which you want to execute a target search (or
b. Right-click to open the shortcut menu and click
c. Click the
d. Using the numeric entry dialog box that appears by right-clicking inside the
Step 2. Executing target search
a. Click the
b. Click the
Search Type
Target
c. Click the
NOTE
When a partial search area has been specified according to the procedure of "Specify the
Partial Search Area" on page 153, the marker moves to the maximum or minimum value
on the trace within this area.
142
click the measurement parameter name area, e.g.
display) (or press
) to make the trace active.
).
Search Def&Range Menu
box (or using the ENTRY/NAVIGATION block key on the front panel), enter
Value
the measurement value of the search into the
button.
<<
drop-down menu to select
Search Type
Menu Item
button to execute the target search.
Search
in the case of overlay
2: θz [°]
Marker Function
button
box.
Target Value
.
Target
Marker Search
The point having the target set on the trace as a
measurement value.
(or press
Target
Chapter 6