Displaying The Values Of Plural Points On A Trace In A Value List; Procedure - Agilent Technologies E4991A Operation Manual

Analysis of Measurement Results

Displaying the Values of Plural Points on a Trace in a Value List

Displaying the Values of Plural Points on a Trace in a Value
List
It is possible to place plural markers on a trace and display their respective values (stimulus
value and measurement value) in a list.
Figure 6-3 Marker List Display "On"

Procedure

Step 1. Place plural markers on the trace according to "Reading Value on the Trace by Specifying
Stimulus Value" on page 128.
Step 2. Click inside the window of the trace to display the marker list (or click the measurement
parameter name area e.g.
the trace active.
Step 3. Right-click to open the shortcut menu and click
Step 4. Click the
Step 5. Click the
130
in the case of overlay display) (or press
2: θz [°]
button (or press
More
button to turn the marker list display "on" (Figure 6-3).
Marker List
(or press
Marker Function
).
) to make
).
Chapter 6