Screen Tv; Using The Sr+ Mode With A Pioneer; Flat Screen Tv - Pioneer VSX-818V-K Operating Instructions Manual

Other connections
• Use a 3-ringed miniplug SR+ cable
connect the CONTROL IN jack of this receiver
with the CONTROL OUT of your flat screen TV.
Before you can use the extra SR+ features, you
need to make a few settings in the receiver. See
SR+ Setup for Pioneer flat screen TVs on
page 66 for detailed instructions.
VIDEO
Pioneer flat screen TV
INPUT 1
DVD player
DVD/BD
AUDIO IN
PHASE
CONTROL
STANDBY / ON
DVD TV DVR VIDEO/PORTABLE
INPUT
SELECTOR
PHONES
SOUND SIGNAL
RETRIEVER VSB MODE SPEAKERS SELECT
VSX-918V
To make the most of the SR+ features, you
should connect your source components (DVD
player, etc.) in a slightly different way to that
described in this chapter. For each
component, connect the video output directly
to the flat screen TV, and just connect the
audio (analog and/or digital) to this receiver.
Note
1 • The 3-ringed SR+ cable from Pioneer is commercially available under the part number ADE7095. Contact the Pioneer
Customer Support division for more information on obtaining an SR+ cable (you can also use a commercially available 3-
ringed mini phone plug for the connection).
• If you connect to a Pioneer flat screen TV using an SR+ cable, you will need to point the remote control at the flat screen TV
remote sensor to control the receiver. In this case, you won't be able to control the receiver using the remote control if you switch
the flat screen TV off.
2 The automatic volume muting feature is enabled separately; see SR+ Setup for Pioneer flat screen TVs on page 66.
1
to
VIDEO
INPUT 2
Satellite receiver, etc
TV/SAT
AUDIO IN
AUDIO/VIDEO MULTI-CHANNEL RECEIVER VSX-918V
PHASE ACOUSTIC AUTO SURR /
CONTROL EQ STREAM DIRECT
STEREO / ADVANCED
A.L.C. STANDARD SURROUND
DIGITAL PRECISION
PROCESSING
CD CD-R iPod USB FM AM AUX
MASTER
VOLUME
iPod DIRECT MCACC
VIDEO L AUDIO R USB PORTABLE

Using the SR+ mode with a Pioneer

flat screen TV

When connected using an SR+ cable, a
number of features become available to make
using this receiver with your Pioneer flat
screen TV even easier. These features include:
• On-screen volume display.
• On-screen display of listening mode.
• Automatic video input switching on the
flat screen TV.
• Automatic volume muting on the flat
2

screen TV.

See also SR+ Setup for Pioneer flat screen TVs
on page 66 for more on setting up the receiver.
RECEIVER
SOURCE
INPUT SELECT
MULTI CONTROL
TV CTRL PORTABLE
DVD TV DVR iPod USB
CD-R
CD FM AM RECEIVER
STEREO/
1 Make sure that the flat screen TV and this
receiver are switched on and that they are
connected with the SR+ cable.
See Using this receiver with a Pioneer flat
screen TV above for more on this.
2 To switch SR+ mode on/off, press
RECEIVER , then the SR+ button.
The front panel display shows SR+ ON or OFF.
TUNER DISP CLASS MPX D.ACCESS
ENTER
MIDNIGHT ANALOG ATT DIMMER SLEEP
EON
SIGNAL SEL iPod CTRL
INFO TV CONTROL
INPUT
TV CH TV VOL
SHIFT
SELECT
10
63
En