The System Setup Menu; Making Receiver Settings From; Automatic Mcacc (Expert) - Pioneer VSX-LX60 Operating Instructions Manual

The System Setup menu

Chapter 8:
The System Setup menu
Making receiver settings from the
System Setup menu
The following section shows you how to make detailed
settings to specify how you're using the receiver (for
example, if you want to set up two speaker systems in
separate rooms), and also explains how to fine-tune
individual speaker system settings to your liking.
SYSTEM OFF
RECEIVER INPUT SOURCE
SELECT
CD CD-R HDMI
DVD TV BD TV CTRL
HOME MEDIA
DVR2 ZONE2/3
GALLERY
DVR1 i Pod TUNER RECEIVER
SLEEP DIMMER ANALOG
1 Switch on the receiver and your TV.
Use the  RECEIVER button to switch on.
• If headphones are connected to the receiver,
disconnect them.
2 Press RECEIVER on the remote control, then press
2
the SETUP button.
An on-screen display (OSD) appears on your TV. Use the
/// buttons and ENTER to navigate through the
screens and select menu items. Press RETURN to
confirm and exit the current menu.
• Press SETUP at any time to exit the System Setup
menu.
3 Select the setting you want to adjust.
DV D/L D
S ystem S et u p M E NU
1. Au to M CACC
2. S ur r Back S y st em
3. M anual M CACC
4. FUL L BAND PHASE CT RL
5. Data M anag em e nt
6. M anual S P S et u p
7. Inp ut S etu p
8. Ot her S et up
• Auto MCACC – See Automatically setting up for
surround sound (MCACC & Full Band Phase Control)
on page 8 for a quick and effective automatic
surround setup. See Automatic MCACC (Expert)
below for a more detailed setup.
Note
1 Make sure not to switch off the power when using the System Setup menu.
2 • Note that when editing items in the Manual MCACC menu, you will need to first specify the MCACC preset you want to adjust by pressing MCACC
before pressing SETUP.
• You can't use the System Setup menu when the iPod, HOME MEDIA GALLERY (VSX-LX70 only) or USB (VSX-LX60 only) input source is selected (in either
the main or sub zone). When you set ZONE 2 or ZONE 3 to ON (page 60), you can't use the System Setup menu.
3 These are stored in memory and referred to as MEMORY1–6 (or M1–6) until you rename them in Data Management on page 48.
4 You may also want to have separate calibration settings for the same listening position, depending on how you're using your system.
D.ACCESS CLASS
DISC
CLEAR
+10
CH ENTER
LEVEL
A PARAMETER V PARAMETER
TOP MENU ì
MENU T.EDIT
TUNE
BAND ST ST
ì ì
ENTER
SETUP SETUP RETURN RETURN
TUNE
PROGRAM
PTY SEARCH GUIDE
TV CONTROL
INPUT
TV CH VOL
TV VOL
SELECT
TV/DTV REC INFO
A
1
- 55 .0dB
: Ex it
• Surr Back System – Specifies how you are using your
surround back speakers (see Surround back speaker
setting on page 42).
• Manual MCACC – Fine-tunes your speaker settings
and customize the Acoustic Calibration EQ (see
Manual MCACC setup on page 42).
• FULL BAND PHASE CTRL – Calibrates and
automatically corrects the frequency-phase
characteristics of the speakers connected (see Full
Band Phase Control on page 47).
• Data Management – Checks your MCACC presets
and manages them through copying, renaming or
deleting (see Data Management on page 48).
• Manual SP Setup – Specifies the size, number,
distance and overall balance of the speakers you've
connected (see Manual speaker setup on page 50).
• Input Setup – Specifies what you've connected to
the digital, HDMI, component video and S-video
inputs (see The Input Setup menu on page 66).
• Other Setup – Makes customized settings to reflect
how you are using the receiver (see The Other Setup
menu on page 67).

Automatic MCACC (Expert)

If your setup requires more detailed settings than those
provided in Automatically setting up for surround sound
(MCACC & Full Band Phase Control) on page 8, you can
customize your setup options below. You can calibrate
your system differently for up to six different MCACC
3
presets , which are useful if you have different listening
positions depending on the type of source (for example,
watching movies from a sofa, or playing a video game
4
close to the TV).
08
39
En