05
The System Setup menu
Chapter 5:
The System Setup menu
Using the System Setup menu
The following section shows you how to make
detailed settings to specify how you're using
the receiver. It also explains how to fine-tune
individual speaker system settings.
RECEIVER
SLEEP
SOURCE
CONTROL
RECEIVER
INPUT SELECT
BD
DVD
TV
1
Press
RECEIVER
then press the SETUP button.
Use / to select the setting you want to
2
adjust then press ENTER
• SP SETUP – Specify the size, number,
distance and overall balance of the
speakers you've connected (see Manual
speaker setup below).
• IN ASSIG – Specify what you've connected
to the component video inputs (see The
Input Assign menu on page 39).
• PRE OUT – Specify how to use the PRE
OUT outputs (see The Pre Out Setting on
page 39).
36
En
AUDIO
TUNER EDIT
PARAMETER
TOOLS
TOP
TV
MENU
DTV/TV
ENTER
INPUT
HOME
MENU
SETUP
RETURN
on the remote control,
.
Manual speaker setup
These setting optimize surround sound
performance. You only need to make these
settings once (unless you change the
placement of your current speaker system or
add new speakers).
MASTER
VOLUME
MENU
Important
• Depending on the PRE OUT setting, there
will be differences in the speaker items that
BAND
can be adjusted.
1
Select 'SP SETUP' from the System Setup
menu.
Use / to select the setting you want to
2
adjust then press ENTER.
• SP SET – Specify size / number of speakers
connected (see Speaker setting on
page 37).
• X.OVER – Specify which frequencies will
be sent to the subwoofer (see Crossover
network on page 38).
• CH LEVEL – Adjust overall balance of your
speaker system (see Channel level on
page 38).
• SP DISTN – Specify the distance of your
speakers from the listening position (see
Speaker distance on page 38).
3
Press RETURN after making the
adjustments necessary for each setting.