Usb Playback; Using The Usb Interface; Basic Playback Controls; Selecting A File From The Folder/File List For Playback - Pioneer VSX-LX60 Operating Instructions Manual

06

USB playback

Chapter 6:
USB playback
VSX-LX60 only (VSX-LX70 – See the separate manual for HOME MEDIA GALLERY)

Using the USB interface

It is possible to listen to two-channel audio
USB interface on the front of this receiver. Connect a
USB mass storage device
1 Switch on the receiver and your TV.
2 Press USB (SHIFT+iPod) to switch to the USB input.
No USB appears in the OSD.
3 Connect your USB device.
The USB terminal is located on the front panel.
AUDIO PARAMETER VIDEO
(TUNE)
SPEAKERS
PHONES
(ST) ENTER
(TUNE)
SETUP RETURN
This receiver
Loading appears in the OSD as this receiver starts
recognizing the USB device connected. After the
recognition, a playback screen appears in the OSD and
playback starts automatically.
USB
Play
R e l a x Yo u r B o d y
K e v i n J a c k s o n
W e a r e a l l o n e
WMA / 128Kbps
You can also select and play back your favorite file from
the folder/file list displayed in the OSD. For details, see
Selecting a file from the folder/file list for playback below.
Note
1 This includes playback of WMA/MP3/MPEG-4 AAC files (except files with copy-protection or restricted playback).
2 • Compatible USB devices include external magnetic hard drives, portable flash memory (particularly keydrives) and digital audio players (MP3 players)
of format FAT16/32. It is not possible to connect this unit to a personal computer for USB playback.
• Pioneer cannot guarantee compatibility (operation and/or bus power) with all USB mass storage devices and assumes no responsibility for any loss of
data that may occur when connected to this receiver.
• With large amounts of data, it may take longer for the receiver to read the contents of a USB device.
3 Make sure the receiver is in standby when disconnecting the USB device.
4 • If the file selected cannot be played back, this receiver automatically skips to the next file playable.
• When the file currently being played back has no title assigned to it, the file name is displayed in the OSD instead; when neither the album name nor
the artist name is present, the row is displayed as a blank space.
• Note that non-roman characters in the playlist are displayed as #.
34
En
1
using the
2
as shown below.
3
MULTI – ZONE &
SIGNAL SB ch
SOURCE/REC SEL
TUNER EDIT BAND CONTROL ON/OFF SELECT PROCESSING
VIDEO/GAME 2 INPUT
MCACC
(ST)
USB
SETUP MIC
DIGITAL IN S-VIDEO VIDEO
USB mass
storage device
4
-55dB
Folder/File number
FLD004TRK0001
Repeat or Shuffle
Song name
Artist name
Album name
Elapsed time
0:01
File format/Bit rate
List

Basic playback controls

The following table shows the basic controls on the
remote for USB playback.
Button What it does

Starts normal playback.

Pauses/unpauses playback.
/ Press and hold during playback to start
scanning.
/ Press to skip to previous/next track.
Press repeatedly to switch between Repeat
STEREO/
F.S.SURR Folder, Repeat One and Repeat All.
Press repeatedly to switch between Shuffle On
and Shuffle Off.
L AUDIO R
DISP Press repeatedly to change the song playback
information displayed in the front panel display.
/
During playback, press to skip to previous/next
track; when browsing, press to move to
previous/next levels.
TOP
Press to select the ROOT folder list; when
MENU browsing a ROOT folder list, press to switch the
ROOT folder list to the playback screen.
RETURN Press to switch the playback screen to the
folder/file list; when browsing a folder/file list,
press to return to the previous level.
Selecting a file from the folder/file list
for playback
The folder/file list displays folders and files stored on your
USB device hierarchically. You can select and play back
a file of your choice by using /// and ENTER.