Operating Range Of Remote Control Unit - Pioneer VSX-LX60 Operating Instructions Manual

04 Controls and displays
DIGITAL VIDEO SCALER indicator – Lights when
Resolution is set to a setting other than PURE (for
example, when the video input signal is upscaled)
(page 70).
HDMI indicator – Blinks when connecting an HDMI-
equipped component; lights when the component is
connected (page 54).
7 Listening mode buttons
HOME THX – Press to select a Home THX listening
mode (page 29).
STANDARD SURROUND – Press for Standard
decoding and to switch between the various
2 Pro Logic IIx and Neo:6 options (page 28).
ADVANCED SURROUND – Use to switch between
the various surround modes (page 29).
8 MASTER VOLUME dial
9 Front panel controls
To access the front panel controls, push gently on the
lower third portion of the panel with your finger.
10 SPEAKERS
Use to change the speaker system (page 56).
11 AUDIO PARAMETER
Use to access the Audio options (page 70).
12 VIDEO PARAMETER
Use to access the Video options (page 71).
13 TUNER EDIT
Use with / to memorize and name stations for recall
(page 36).
14 BAND
Switches between AM and FM radio bands (page 36).
15 MULTI-ZONE & SOURCE/REC SEL controls
If you've made MULTI-ZONE connections (see MULTI-
ZONE listening on page 58) use these controls to control
the sub zone from the main zone (see Using the MULTI-
ZONE controls on page 60).
You will also need to use the REC SEL controls when
recording a source (see Making an audio or a video
recording on page 72).
16 SIGNAL SELECT
Use to select an input signal (page 31).
24
En
17 SBch PROCESSING
Selects the surround back channel mode (page 31) or
virtual surround back mode (page 32).
18 STEREO/F.S.SURR
Switches between the stereo playback mode (page 30)
and the Front Stage Surround Advance mode (page 30).
19 PHONES jack
Use to connect headphones. When the headphones are
connected, there is no sound output from the speakers.
20 SETUP
Press to access the System Setup menu (see page 39).
21 /// (TUNE/ST) /ENTER
Use the arrow buttons when setting up your surround
sound system (see page 39). Use the TUNE / buttons
to find radio frequencies and use ST / to find preset
stations (page 36).
22 RETURN
Press to confirm and exit the current menu screen.
23 USB interface
Connect a USB audio device for playback.
See the separate manual for HOME MEDIA GALLERY
(VSX-LX70) or USB playback on page 34 (VSX-LX60).
24 MCACC SETUP MIC jack
Use to connect the supplied microphone.
25 VIDEO/GAME 2 INPUT
See Connecting a component to the front panel inputs on
page 18.

Operating range of remote control unit

The remote control may not work properly if:
• There are obstacles between the remote control and
the receiver's remote sensor.
• Direct sunlight or fluorescent light is shining onto the
remote sensor.
• The receiver is located near a device that is emitting
infrared rays.
• The receiver is operated simultaneously with another
infrared remote control unit.
30
30
7 m