Cable Management Arm Installation
16
Figure 10: Installing and removing the Cable Management Arm
8
7
6
•
Fit the other latch on the end of the outermost bracket until the latch engages (7).
•
To remove the CMA, disengage both latches by pressing the CMA release buttons
at the top of the inner and outer latch housings (8).
4 To move the CMA away from the CMA tray, do the following:
•
The CMA can be pulled away from the system and extended away from the tray for
access and service (9).
FortiAnalyzer-2000B Version 4.0 MR1 Rack and Hardware Install Guide
Rack Installation Instructions
Revision 1
http://docs.fortinet.com/
•
Feedback