Fortinet FortiAnalyzer-4000 Quick Start Manual

Checking the Package Contents

Connector
Ports 1 and 2
CONSOLE
Connecting
Connect the FortiAnalyzer unit to a power outlet and to the network hub or switch.
• Place the FortiAnalyzer unit on a stable surface. It requires 1.5 inches (3.75 cm) clearance
on each side to allow for cooling.
• Make sure the power is not plugged into the wall before connecting the power cable.
• The Status light flashes while the unit is starting up and remains lit when the system is up
and running.

Planning the Configuration

You can add the FortiAnalyzer unit to your local FortiGate network to receive log messages
from your local FortiGate units, or connect the FortiAnalyzer unit to the FortiGate units re-
motely using FortiManager. To connect the FortiAnalyzer unit to the FortiGate units remotely,
you must configure the DNS server and the default gateway.
To manage the FortiAnalyzer unit, you can use a computer within the local network or over
the Internet.

Factory Defaults

User name:
Administrator Account
Password:
IP:
Port 1 Netmask:
Management Access:
IP:
Port 2 Netmask:
Management Access:
Front
Ethernet Connections
Type Speed Protocol
RJ-45 10/100Base-T Ethernet
DB-9 9600 bps RS-232 serial
admin
(none)
192.168.1.99
255.255.255.0
ping, https, http, ssh
192.168.2.99
255.255.255.0
ping, https, http, ssh
© Copyright 2006 Fortinet Incorporated. All rights reserved.
Products mentioned in this document are trademarks or registered trade-
marks of their respective holders.
Regulatory Compliance
FCC Class A Part 15 CSA/CUS
25 September 2006
Back
UID
Serial Connection
Description
Connection to the network
Connection to the management computer. Provides
access to the command line interface (CLI).
Straight-through Ethernet cable connects
to hub or switch on the network
FortiAnalyzer-4000
05-30003-0240-20060925
Ethernet Cables:
Orange - Crossover
Grey - Straight-through
Null-Modem Cable
Power
Connection
Power Cable
Copyright 2006 Fortinet Incorporated. All rights reserved.
Trademarks
Products mentioned in this document are trademarks.
Documentation
UID
Null modem cable connects
to serial port on management computer
(RS-232)
Q u i c k S t a r t G u i d e
FortiAnalyzer-4000
Power
Connection