10
Figure 4: Installing the system on the rack
14
•
Locate the three shoulder screws on one side of the system and lower them into the
J-slots on the slide assembly (12).
•
Seat the three screws on the other side, lowering the system until all shoulder
screws engage in the J-slots (13).
•
Push the system inward until the front release latch clicks into place. Press the
slide-release lock buttons on both rails and slide the system into the rack (14).
5 To engage and release the slam latch, do the following:
•
Facing the front, locate the slam latch on either side of the system (15).
13
FortiAnalyzer-2000B Version 4.0 MR1 Rack and Hardware Install Guide
Rack Installation Instructions
11
12
Revision 1
http://docs.fortinet.com/
•
Feedback